You’re driving down the road and TINK! a rock bounces off your windshield. You watch in horror as the crack starts to develop.
Don’t worry. Crackmasters can fix it with our quick four-step process.
First, we clean out the chip or crack to remove any dirt or debris that has collected in the damage. We also suck out any air pockets that have formed. This step is critical as it allows the repair resin to fill in the damaged area.
Then we use a special drill to open the chip. It might sound backwards to make the damage worse before we make it better, but this step allows the repair resin to flow completely into the damaged area which makes for a stronger repair.
The third step is to inject the repair resin into the chipped or cracked spot on the glass. The quality of a windshield repair is only as good as the resin used, and we use the best windshield repair system in the world – Ultra Bond.
Finally, we cure the resin using a special ultraviolet light. During this curing process, the resin hardens and forms a seamless bond with the glass. You’ll hardly be able to see repair, and your windshield will be stronger than ever.
The whole process takes less than 30 minutes, too, so you’ll be back on the road in no time. Find Crackmasters Canada location near you and take care of your chip and crack repair needs today.
